Skip to content

Cart

Your cart is empty

Shokunin

Shokunin・職人

Sort by

1188 products

Filters

宗家 大内 下り輪打  Hoop setter Sagariwauchi (For Chisel Ring Set up) by Ouchi
Sukemaru 4th Timber chisels by Usui Yoshio 四代助丸 碓氷淑郎 叩き鑿   Each size
Hyobu Small Plane (Ko-Kanna) by Nakano Takeo   中野武夫作 小鉋 兵部
Sold outAngle Checker Recommended by Usui Kengo 刃物角度定規
Sukemaru High-Speed Steel Bench chisels  Each size (Oirenomi)       助丸ハイス 追入鑿 Oirenomi
Kanaban (steel lapping plate) Both sides by Tsunesaburo 常三郎 金盤 両面  255*75*11.5mm
Touroku Square Hammers(Gennon) by Hiroki‘s Apprentice  藤六 四角玄翁  黒仕上
Tenhiro Small Plane by Seikichi Sekikawa with Blue steel 関川誠吉 小鉋 天弘 青紙一号
Sukemaru 4th High-Speed Steel Medium Timber chisels by Usui Yoshio 四代助丸 碓氷淑郎 ハイス鋼 中叩き鑿 Chutatakinomi
Sukemaru Slick Chisels (Irimoya / Anayanomi) 助丸 入母屋鑿・穴屋鑿  48,42,36,30,24,18,15,13.5,12 mm
Sukemaru Slick Chisels Long type (Anayanomi) 助丸 穴屋鑿 長型  48,42,36, 30,24,15,12mm
Large Kanaban (steel lapping plate) Both sides by Tsunesaburo 常三郎作 特大金盤 両面  340*90*11.5mm
Chiyoharu Small Plane by Nakano Takeo    /      中野武夫作 千代治 小鉋 赤樫台
Touroku Octagon Hammers(Gennon) by Hiroki‘s Apprentice  藤六 八角玄翁  黒仕上
Sold outLarge Kanaban Extra thick (steel lapping plate) Both sides by Tsunesaburo  常三郎作 特厚金盤 両面 大 340*90*24.5mm
Touroku Silver finish Square Hammers(Gennon) by Hiroki‘s Apprentice  藤六 四角玄翁 燻仕上
Soutoha Kensaki by Chiyotsuru Sadahide 3rd Generation Right hand  双頭刃 三代目千代鶴貞秀 剣先 7分
Hiroki Square Hammers with Blacksmith finish    /    浩樹 全鋼 四角玄翁 黒仕上
Kikuhiromaru Paring chisels (Usunomi)  菊弘丸 薄鑿 8,12,15,18,24,30,36,42,48mm
Touroku Daruma Hammers (Genno) by Hiroki‘s Apprentice  藤六 ダルマ玄翁  黒仕上
四代目助丸 碓氷淑郎 ハイス叩鑿  Sukemaru 4th High-Speed Steel Timber chisels by Usui Yoshio Tatakinomi
Chiyoharu Small Plane by Nakano Takeo       中野武夫作 千代治 小鉋
四代助丸 叩き鑿 三本裏 碓氷淑郎   Sukemaru 4th Timber chisels by Usui Yoshio Triple Ura
磯野信夫作 狐 叩鑿 白樫柄   Kitsune Timber chisels with white steel by Isono Nobuo  Tatakinomi
Sold outSukemaru 4th High-Speed Steel Bench chisels 10pc set  四代助丸 碓氷淑郎 ハイス鋼追入組鑿 10本組 Oirenomi
Sold outIoroi Paring chisels with white steel by Ioroi Hideo 五百蔵秀夫作 五百蔵 薄鑿  白樫柄
#1 Iwazaki Mortise chisels with white Oak Handle by Iwazaki Eisuke 岩崎永祐作 岩崎 向待鑿 白樫柄 Mukomachi Nomi
Sold outOuchi Trowel chisel (Kote nomi) Dovetail type     大内 四代目大内俊明作 鏝鑿 鎬型
Ouchi Paring chisels with white steel by Ouchi 4th generation 四代目大内俊明作 宗家大内 薄鑿 Usunomi
Sold outTouroku Funate Stainless steel Hammers(Gennon) by Hiroki‘s Apprentice  藤六 ステンレス舟手玄翁
Sold outKanetake Paring chisels by Takahashi Norikazu 高橋典三作 カネ武 薄鑿 12,15,18,30,24,36mm Usunomi
Kikuhiromaru Timber chisels with White steel No.2  菊弘丸 叩き鑿 Tatakinomi 24,30,48mm
Hiroki Octagon Hammers with Blacksmith finish 浩樹 全鋼 八角玄翁 黒仕上
Sold outSukemaru Slick Chisels (Ootsuki-nomi, Hontsuki-Nomi) 助丸 本突き鑿  48,42,36,30,24mm
Sold outBrand new Masatsura Square Hammers Blacksmith finish  正行 四角玄翁 黒仕上
Ioroi #2 Dovetail Paring chisels with white steel by Ioroi Hideo  五百蔵秀夫作 五百蔵 (シノギ)薄鑿 白樫柄
MIKI Kiridashi by Tsunesaburo with Powder metallurgy HSS steel 酒壺 常三郎作 黒打 粉末ハイス鋼 切出し小刀 18,21mm
Tenhiro Rabbet Planes by Seikichi Sekikawa with blue steel 関川誠吉作 際鉋 天弘 青紙一号鋼
Sold outFujihiro Trowel chisel (Kote nomi) Dovetail type by Chuutarou Imai 今井忠太郎作二治弘  鏝鑿 鎬型  9,12,15,18,24mm
Tsunesaburo Shunran Spokeshave Plane by Blue Steel  常三郎作 春蘭 南京鉋 青紙鋼
Sold outFukushima Yamakichi Blacksmith finish Hammers 福島作 山舎型玄翁 黒仕上
Kikuhiromaru Dovetail Paring chisels (Usunomi)  菊弘丸 シノギ薄鑿
Ioroi Timber chisels with white steel by Ioroi Hideo 五百蔵秀夫作 五百蔵 叩鑿  Tatakinomi
Sold outOld stock Kanetake Early works Uchimaru chisels by Takahashi Norikazu 高橋典三作 早期作品  カネ武 内丸鑿
Sold outFukushima Octagon Blacksmith finish Hammers 福島作 八角玄翁 黒仕上
Sold outTenhiro Chamfer Plane by Seikichi Sekikawa 45°   天弘 関川誠吉作 自由角面取鉋 30mm
Sold outKanaban Extra thick(steel lapping plate) Both sides by Tsunesaburo 常三郎 特厚金盤 両面  255*75*24.5mm
Sold outTouroku Yamakichi Hammers(Gennon) by Hiroki‘s Apprentice  藤六 ヤマキチ型玄翁 黒仕上