YAMASUKE KurashigeTools

Old stock Koetsu Kiridashi Kokatana with white steel by Sakamitsu 掘出し物 侊悦 切出小刀 二代坂光作 18mm

¥8,200 JPY
· Blade info
Craftsman/職人: Sakamitsu 2rd · 二代坂光作
Place/地域: Echigo Sanjyo・越後三条打刃物
Steel/鋼: White steel・白紙鋼
Jigane/地金: Modern soft iron・極軟鉄
Full length/全長: about 200mm
Blade Width/ 刃幅: 18mm
Blade total length/刃全長: about 200mm
Thickness/厚さ: about 3.4mm
· Notice
未使用品ですが、年月が経過していて錆があったり、包装が汚れや破損していたり、木部など劣化している場合もあります。
Because it has been put in the storehouse for a long time,there will be some imperfections in the products.Please confirm the photos carefully before shopping. 
スタイル:
量:

在庫残り8個

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Derek Teong
侊悦 切出小刀 18mm

A thin kiridashi knife; not for heavy carving, but a wonderful point for tighter curves and the like. Do note that you will need to set it up before use; that means flattening the ito ura and most of the bevel closest to the tip (the little leftover bevel bits will be flattened out eventually anyway) .

おすすめ商品

最近見た商品

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Derek Teong
侊悦 切出小刀 18mm

A thin kiridashi knife; not for heavy carving, but a wonderful point for tighter curves and the like. Do note that you will need to set it up before use; that means flattening the ito ura and most of the bevel closest to the tip (the little leftover bevel bits will be flattened out eventually anyway) .

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Derek Teong
侊悦 切出小刀 18mm

A thin kiridashi knife; not for heavy carving, but a wonderful point for tighter curves and the like. Do note that you will need to set it up before use; that means flattening the ito ura and most of the bevel closest to the tip (the little leftover bevel bits will be flattened out eventually anyway) .

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
Derek Teong
侊悦 切出小刀 18mm

A thin kiridashi knife; not for heavy carving, but a wonderful point for tighter curves and the like. Do note that you will need to set it up before use; that means flattening the ito ura and most of the bevel closest to the tip (the little leftover bevel bits will be flattened out eventually anyway) .