For drilling a hole for pipe and duct in Gypsum and Hard Cement Board
- Range in size 30mm to 120mm.
- With the use of Long Bar 200mm as an optional attachment, drilling 200mm diameter is available.
- Smooth and speed work by twin-blades.
Specifications
| Usage |
Gypsum and Hard Cement Board |
| Material(s) |
Body：High Carbon Steel
Center Drill：High Carbon Steel with T.C.T.
Replaceable Blade：Diamond |
| Capacity |
【Bar Length 120mm】Hole sizes： 30mm-120mm
【Bar Length 200mm】Hole sizes： 30mm-200mm
【Applicable depth】Single face：25mm / Both face： 50mm |
| Recommended tool(s) |
Electric Power Drill |
| RPm |
Bar Length 120mm：Less than 1,500rpm
Bar Length 200mm：Less than 600rpm
|
| Shank Shape |
 ：Three Flats |
 Caution |
- For some of the ceramic type siding board may not be applied.
|
Sizes
Shank Shape：d Unit：mm
| Product No. |
Name |
Size |
Shank Shape |
| 36D |
Set |
30X120 |
10
|
| 36DL |
Set with 200mm Bar |
30X200 |
10
|
QTY(Inner Box)：6pcs
Assembly
Replaceable Blade
| Product No. |
Description |
| 36D-K |
2pcs Set |
QTY(Inner Box)：6pcs
※ Shared use of replaceable blade for No.5010D.
Center Drill
Size：D Overall Length：L Spiral Length：SL Shank Shape：d Unit：mm
| Product No. |
Size |
Overall Length |
Spiral Length |
Shank Shape |
| 36D-CD |
8 |
60 |
30 |
8 |
※ Shared use of replaceable center drill for No.5010D.
Bar・Long Bar
Unit：mm
| Product No. |
Name |
Size |
Thickness |
| 36D-B120 |
Bar |
120 |
9 |
| 36D-B200 |
Long Bar |
200 |
9 |
※Exclusive bars for No.36D and No.36DL. Cannot be shared with other Adjustable Circle Cutter.
※Bar includes Safety Stopper.
Other Assembly
Unit：mm
| Product No. |
Name |
Size |
| 36D-OP1 |
Center Drill set screw |
8X12 |
| 36D-OP2 |
Bar set screw |
8X12 |
| 36D-OP3 |
Holder set screw（1pc） |
5X15 |
| 36D-OP4 |
Replaceable Blade set screw（1pc） |
5X10 |
| 36D-OP5 |
Safety Stopper（1pc） |
6X6 |
| 36D-OP6 |
Hex Wrench |
4 |
| 36D-OP7 |
Main Shaft ※1 |
- |
| 36D-OP8 |
Holder without Replaceable Blade ※2 |
Left |
| 36D-OP9 |
Holder without Replaceable Blade ※2 |
Right |
※1 Main Shaft（36D-OP7）includes the Center Drill set screw（36D-OP1）and Bar set screw（36D-OP2）.
※2 Holder without Replaceable Blade（36D-OP8・36D-OP9）includes Holder set screw（36D-OP3）and Replaceable Blade set screw（36D-OP4）.
Bits of knowledge
- Drilling into the Kitchen panel is available, but just before the drilling will be finished, lower the rotation speed and drilling softly. It may break the Kitchen panel if you do the drilling strongly.
